Cisco 7921g Usb Install Windows

Posted on  by

Download the driver from cisco.com USB-Install-7921-7925.1-0-2a.exe (This file is just. The files are extracted to C: Program Files Cisco Systems Cisco IP Phone CP-79xx USB Driver 7921G. Once NIC is installed and configuring an IP (i.e. Use a USB Key to Install Windows 7 - Even on a Netbook.

It should also be mentioned that this camera was made for other companies beside Cisco. So if you have a camera that looks like the one pictured here, this may work for you. The following information will help you install drivers for this webcam on a 64-bit Windows computer. Pretty much any computer you buy these days is going to be a 64-bit system. If your computer was made after 2010, odds are you’ve got a 64-bit computer. (Note: this guide has been tested on Windows 7, if it works for you let us know in the comments below)

Cisco 7921g Usb Install Windows

If you’re still using the Cisco VT II webcam, you’re probably like me. You just want to use the camera and you’re not too worried about having the latest and greatest. These webcams were produced on a massive scale for other companies besides Cisco. I’ve been to thrift stores and found huge boxes full of them. Since this is an older webcam it can be difficult to find working drivers for Windows. It should be mentioned, for any Linux users out there, these don’t require additional drivers on most distros from what I’ve seen. Without anymore delay, here we go with the instructions.

  1. When autocomplete results are available use up and down arrows to review and enter to select.
  2. 7925G and 7921G. The installation instructions refer to Cisco Unified Wireless IP Phone 7925G but they are also applicable to the 7921G. For more details on the installation procedures, refer to the Cisco Unified Wireless IP Phone 7925G Administration Guide or Cisco Unified Wireless IP Phone 7921G Administration Guide at the following URL.
  3. Step 2 Double-click on the USB-Install-7921.1-0-1.exe file to start the installation program. Step 3 Follow the prompts in the Install Shield Wizard. Note If you receive a Hardware Installation warning message stating that the software has not passed Microsoft Windows Logo testing, click Continue.

Since Cisco doesn’t have 64 bit drivers available that I know of, we are going to use Logitech drivers. It will require a little finagling but literally anyone can do this.

Wireless

Usb Install Xp

  1. Download qc1051enu_x64 and open it.
  2. Follow the instructions. It should fail at some point, telling you that your system isn’t supported. That is fine, move on to the next step.
  3. Open the following C:LogitechQuickCamWebInstallDriversx64PRO364IPRO364V.inf and replace each 08CE with 08C7.
  4. Open Device Manager. You should be able to access it from the Control Panel > Harware and Sound > Device Manager.
  5. You are looking for an “Undefined Device”. It will probably appear under “Other Devices” and have an exclamation mark by it.
  6. Right click on the device and choose “Update Driver Software…”
  7. Click “Browse my computer for driver software” and click the “Browse” button. Navigate to C:LogitechQuickCamWebInstallDriversx64PRO364 and click the “OK” button.
  8. Click the “Next” button.
  9. Be sure to make sure you do NOT have automatic updates turned on for this driver. There should be a checkbox you will need to deselect while you’re installing the driver.
  10. Continue through the prompts and you should have a working webcam. (Test your cam here)

Cisco 7921g Usb Install Windows 10

If this worked for you, let us know by commenting below with your version of Windows and any tips you have.